User Manual Q&AAnswer
Feb 18, 2025 - 08:28 PM
To install the KING PL-D6-C12 Type IC 6 Inch Slim Round LED Panel Lights, follow these steps:
1. Determine the desired location for the light fixture and ensure that the cut-out size matches the 6-inch diameter specified in the manual.
2. Turn off the power supply to the installation area.
3. Remove the existing ceiling material or pot light can, if applicable.
4. Connect the wiring from the power supply to the LED driver box using the provided quick connect push-in terminals. Make sure to follow the wiring diagram in the manual.
5. Attach the LED driver box to the ceiling using the included junction box.
6. Insert the LED panel light into the cut-out hole and secure it in place using the two spring-loaded clips.
7. Turn on the power supply and test the light fixture. It should be ready for use.
Note: It is important to read and follow all safety instructions and warnings provided in the manual before installing the LED panel lights. If you are unsure about any step of the installation process, it is recommended to consult a professional electrician.
Add New Comment