User Manual Q&AAnswer
Feb 18, 2025 - 06:17 AM
To configure the Modbus ID for the Schneider Electric SRVSMB001 Easy UPS Modbus Card, follow these steps:
1. Locate the 8 switches on SW1 of the Modbus card. These switches are numbered from left to right.
2. Each switch can be in either the ON or OFF position. When a switch is pushed upwards, its setting is 0, and when it is pushed downwards, its setting is 1.
3. Refer to the appendix section of the user manual for the Machine ID Configuration Table, which provides a list of switch settings and their corresponding Modbus IDs.
4. Determine the Modbus ID you want to assign to your Modbus card.
5. Set the switches on SW1 according to the Modbus ID you want to configure. For example, if you want to set the Modbus ID to 5, you would set switch 1 to ON and switches 2-8 to OFF.
6. Once you have set the switches to the desired Modbus ID, the configuration is complete.
Please refer to the user manual for more detailed information and illustrations on configuring the Modbus ID for the Schneider Electric SRVSMB001 Easy UPS Modbus Card.
Add New Comment