User Manual Q&AAnswer
Feb 18, 2025 - 05:53 AM
To connect the BLACKBIRD P/N 43395 4K 6x2 HDMI Matrix with Audio to your system, follow these steps:
1. Ensure that all devices to be connected are powered off and disconnected from their power sources.
2. Using a High Speed HDMI Cable, plug one end into an HDMI input on one of your displays, then plug the other end into the OUTPUT A port on the matrix. If you want to use the ARC feature, you must connect to an input that supports ARC.
3. Using a High Speed HDMI Cable, plug one end into an HDMI input on your second display, then plug the other end into the OUTPUT B port on the matrix.
4. (Optional) Using a digital optical (Toslink) cable, plug one end into the digital optical input on your amplifier, then plug the other end into the TOSLINK port on the matrix.
5. (Optional) Using a digital coaxial cable, plug one end into the digital coaxial input on your amplifier, then plug the other end into the COAXIAL port on the matrix.
6. (Optional) Using a 3.5mm audio cable, plug one end into your amplifier or powered speakers, then plug the other end into the STEREO jack on the matrix.
7. Using a High Speed HDMI Cable, plug one end into one of the HDMI inputs on the matrix, then plug the other end into the HDMI output on one of your video source devices. Repeat for up to five additional video source devices.
8. Plug one end of the included AC power adapter into the DC/5V connector on the matrix, then plug the other end into a nearby AC power outlet.
9. Pull the film out of the remote control to allow its battery to connect to the battery terminal.
10. Aim the remote control at the IR "eye" on the matrix, then press the Power Button on the remote to turn the matrix on.
11. Plug in and power on all connected equipment. Use the controls on the remote control to switch to each input for each output to verify that the system is connected properly.
For more detailed information and diagrams, please refer to the "SAMPLE CONNECTION DIAGRAM" section in the user manual.
Add New Comment