User Manual Q&AAnswer
Feb 18, 2025 - 05:51 AM
To pair multiple push buttons with the ELRO DB3000-series Wireless Doorbell Set, follow these steps:
1. Ensure that the push button and doorbell are delivered already paired. If not, activate the push button by pressing it (7) and insert batteries into the battery model or plug in the plug-in model into an electrical outlet.
2. If you need to pair additional push buttons, press and hold the pairing button on the doorbell (approx. 5 sec.) until the blue LED turns on.
3. The doorbell will enter the pairing learning mode for 25 seconds.
4. Press the push button of the additional push button you want to pair within the 25-second pairing learning mode.
5. The doorbell will respond with the set melody, indicating that the push button is successfully paired.
Remark: You can pair multiple push buttons with the doorbell. The doorbell has an internal memory, so there is no need to re-pair after battery change.
For more information and detailed instructions, please refer to the user manual provided with the ELRO DB3000-series Wireless Doorbell Set.
Add New Comment