User Manual Q&AAnswer
Feb 18, 2025 - 05:50 AM
To install the INVIXIUM SENSE 2 Touch 2 MYCRO device, follow these steps:
1. Remove the Mounting Plate, Wired Back Cover, and Screws from the IXM INSTALL KIT.
2. Install the Mounting Plate at the desired location, recommended to be 120 cms from the floor to the bottom of the device.
3. Make the necessary connections to the Wired Back Cover by referring to the "Get Wired" section in the user guide.
4. Unscrew and remove the Temporary Back Cover from the device, then connect the Wired Back Cover using the same screws.
5. Hang your device on the Mounting Plate and secure it on the bottom with the provided xxxx .
For more detailed instructions and illustrations, please refer to the "Getting Started" section in the INVIXIUM SENSE 2 Touch 2 MYCRO INGUIDE User Guide.
Note: It is important to connect the device to Earth Ground for protection against Electrostatic Discharge. Refer to the "Get Wired Glossary" section for instructions on connecting to Earth Ground.
Please ensure that you have read and understood the complete user guide before proceeding with the installation.
Add New Comment