User Manual Q&AAnswer
Feb 18, 2025 - 05:39 AM
To install the Robern LIT Freestanding Magnification Mirror, please follow these steps:
1. Unpack the mirror and check the box thoroughly for all hardware and loose parts. Carefully inspect the mirror for any damage.
2. Observe all local electrical codes and building codes when connecting the mirror. This mirror is for indoor use only and is UL listed for damp locations.
3. Before installation, disconnect the power by unplugging the mirror from the electrical outlet.
4. Plug the mirror into a GFCI (Ground Fault Circuit Interrupter) protected outlet.
5. Use and maintenance: When cleaning the mirror surface, use only a lint-free polishing cloth. Do not use ammonia-based cleaners or abrasive cleansers. To remove stubborn stains, slightly dampen the cloth with water or rubbing alcohol. For cleaning the metal frame, use only a damp cloth.
Please note that this is a general installation guide. For specific instructions and details, please refer to the instruction manual that came with your specific model of the Robern LIT Freestanding Magnification Mirror.
Add New Comment