User Manual Q&AAnswer
Feb 18, 2025 - 05:31 AM
If you don't have existing doorbell wiring, you can use the battery-powered option for the aosu Video Doorbell. Here are the steps to install it:
1. Find a Mounting Spot: Take the video doorbell to your front door and check the live view on the App at the same time. Find a location where you can get the desired field of view. Consider factors like reusing existing holes and anchors, avoiding wall reflections, and recommended mounting height.
2. Mounting The Bracket: If you're mounting the doorbell on a wooden surface, you don't need to pre-drill pilot holes. Use the provided screws to secure the Mounting Bracket on the wall. The xxxx Hole Positioning Card indicates the position of the xxxx holes.
3. Mounting the Doorbell: Align the doorbell on top of the bracket and then snap it on the bottom. Press it down until it clicks into place.
To detach the doorbell or recharge it, you can use the doorbell detaching pin provided to detach it from the Mounting Bracket. Press and hold the hole on the bottom of the doorbell and then lift its bottom to take it off.
Please refer to the complete user guide for more detailed instructions and illustrations.
Add New Comment