User Manual Q&AAnswer
Feb 18, 2025 - 05:27 AM
To adjust the pressure on the Druck PV210 Low Pressure Pneumatic Hand Pump, follow these steps:
1. Before applying pressure, make sure all connections are correct and the equipment is internally clean and free from damage.
2. Make sure that all equipment is to the correct pressure rating. Do not exceed the maximum operating pressure stated in the specification.
3. Use the fine adjust vernier (Figure A1, 2) to make accurate adjustments to the pressure. Turn the fine adjust vernier clockwise to increase the pressure or counterclockwise to decrease the pressure.
4. To prevent damage to sensitive instruments, use the adjustable pressure relief valve (Figure A2, 8). Turn the xxxx in the bottom of the pump handle to adjust the maximum output pressure.
It is important to follow the safety precautions and guidelines provided in the manual to ensure safe operation of the pump. For further technical advice or assistance, you can contact the manufacturer or their subsidiary.
Add New Comment