User Manual Q&AAnswer
Feb 18, 2025 - 05:20 AM
To update the firmware for the CREALITY BLouch Auto Bed Leveling Sensor, follow these steps:
1. Right-click the mouse to format the SD card. This ensures that the firmware can be flashed successfully. Please format the SD card before flashing the firmware.
2. Download the firmware from the CREALITY website. Before downloading the firmware, make sure to confirm your printer model, motherboard version, and hardware configuration. Each printer model corresponds to a specific BL Touch firmware. You can find the firmware download link on the CREALITY website.
3. Copy the downloaded firmware file to the SD card. Please note that the SD card can only hold one firmware file.
4. Insert the SD card into your 3D printer.
5. Insert the power cord and press the switch to turn on the printer.
6. Wait for the firmware upgrade to complete. This usually takes about 10 seconds.
By following these steps, you will be able to update the firmware for the CREALITY BLouch Auto Bed Leveling Sensor.
Add New Comment