Answer

Feb 18, 2025 - 05:17 AM
Cleaning the Formula Pro Advanced is essential to keep it functioning properly and maintain hygiene for your baby. Here are the steps to clean the machine:
1. Remove the Funnel and Funnel Cover by pulling them out and down.
2. Wash the Funnel and Funnel Cover with warm, soapy water and rinse them well. Make sure they are completely dry before re-installing.
3. Wipe the powder-dispensing hole on the underside of the powder container using a dry paper towel or a soft dry cloth.
4. It is recommended to clean the Funnel and Funnel Cover after every four bottles made to ensure accurate dispensing. If you want to make daily cleaning easier, you can purchase an extra Funnel and Funnel Cover from BabyBrezza.com and swap them when needed.
5. For monthly cleaning, hand-wash all the parts shown in the manual with warm soapy water, rinse them well, and dry them thoroughly.
6. If you notice mineral scale on the water heater inside the machine, you can perform a monthly descaling process. Fill the water tank with a mixture of 20oz distilled vinegar and 20oz purified water, then follow the instructions provided in the manual for descaling.
7. Before long-term storage, make sure to clean the machine and remove all formula powder residue. Follow the instructions in the manual for long-term storage.
Remember to always refer to the manual for detailed instructions on cleaning and maintenance to ensure the proper functioning of your Formula Pro Advanced.
Add New Comment