User Manual Q&AAnswer
Feb 18, 2025 - 05:12 AM
To attach the rubber feet to the sander, follow these steps:
1. Lower the machine onto its side.
2. Remove the feet from the plastic wrapping.
3. Remove the nut and washer from the thread.
4. Locate the four mounting points on the underneath of the machine.
5. Insert the thread into the hole so that the rubber foot points downward.
6. Put on the washer followed by the nut.
7. Tighten the nut with a spanner.
8. Repeat the above steps for the other three feet.
9. Site the machine at a suitable height enabling sanding operation to be carried out comfortably and in a safe manner.
Please refer to the instruction manual for visual illustrations and additional information on attaching the rubber feet.
Add New Comment