How do I set up the SPYCLOPS 1202WIP5AF IP Camera? (SPYCLOPS 1202WIP5AF IP Camera User Guide)

Answer

manuals.plus

Feb 18, 2025 - 05:01 AM


To set up the SPYCLOPS 1202WIP5AF IP Camera, please follow these steps:

1. Connect the camera to your network: Use an Ethernet cable to connect the camera to your router or switch. Make sure the camera is powered on.

2. Find the camera's IP address: You can use the Spyclops IP Finder software or check your router's DHCP client list to find the IP address assigned to the camera.

3. Access the camera's web interface: Open a web browser on your computer and enter the camera's IP address in the address bar. Press Enter to access the camera's web interface.

4. Log in to the camera: Enter the default username and password provided in the user manual or on the camera itself. It is recommended to change the default password for security reasons.

5. Configure camera settings: Once logged in, you can customize various settings such as resolution, frame rate, motion detection, and network settings. Refer to the user manual for detailed instructions on each setting.

6. Mount the camera: Choose an appropriate location for the camera and mount it securely using the included mounting hardware. Adjust the camera angle and focus as needed.

7. Test the camera: After completing the setup, you can test the camera by viewing the live feed on your computer or mobile device. You may also configure recording and playback settings if desired.

For more detailed instructions and troubleshooting tips, please refer to the SPYCLOPS 1202WIP5AF IP Camera User Guide.