User Manual Q&AAnswer
Feb 18, 2025 - 04:54 AM
To install the BOSE FreeSpace FS2C & FS4CE Adjustable Tile Bridge, please follow these steps:
1. Assembling the Tile Bridge:
a. Align the rails and insert the tabs into the slots.
b. Pull the rails outward to secure them together.
Note: If you are installing in a hard ceiling, assemble the tile bridge after inserting the rails and ring through the hole cutout.
c. Align the rails parallel to each other and press the tile bridge ring down to secure the ring to the rails.
2. Installing a Tile Bridge in Acoustic Ceiling Tile:
a. Cutting the Ceiling Tile:
- Remove the tile and use the template included with your loudspeaker to trace a loudspeaker hole onto the tile. To center the template on the tile, draw an X by connecting the corners diagonally and center the template using the crossing point.
- Cut a hole into the tile.
b. Installing the Tile Bridge:
- Place the assembled tile bridge across the ceiling grid. If necessary, adjust the tile bridge so the rails rest on the ceiling grid.
- Replace the tile in the ceiling.
3. Installing a Tile Bridge in Hard Ceiling (Existing Construction):
a. Cutting the Ceiling:
- Use the template to trace a hole onto the ceiling.
- Cut a hole into the ceiling.
b. Installing the Tile Bridge:
- Insert the tile bridge rails and ring through the hole and place the rails parallel to each other across the ceiling grid or ceiling furring.
- Assemble the tile bridge.
For detailed instructions on loudspeaker installation, please refer to the "Mounting the Loudspeaker" section in the appropriate loudspeaker installation guide.
Add New Comment