User Manual Q&AAnswer
Feb 18, 2025 - 04:53 AM
To properly install HILTI S-BT-MF M8/M10 Threaded Studs & Standoffs, please follow the instructions provided in the instruction manual. Here is a step-by-step guide:
1. Preparation:
- Ensure that you have the necessary tools for installation, such as a wrench or socket set.
- Review the dimensional specifications of the studs and standoffs to determine the appropriate size for your application.
- Make sure you have a clear understanding of the structural steel or aluminum member to which you will be connecting the materials.
2. Marking and Drilling:
- Mark the desired locations on the structural steel or aluminum member where the studs or standoffs will be installed.
- Use a suitable drill bit to create holes in the marked locations. The diameter of the hole should match the size of the threaded stud or standoff being used.
3. Insertion of Threaded Studs:
- Insert the threaded stud into the hole on the structural steel or aluminum member.
- Ensure that the threaded portion of the stud is fully engaged with the material.
- Use a wrench or socket set to tighten the stud securely.
4. Installation of Standoffs:
- Insert the threaded portion of the standoff into the hole on the structural steel or aluminum member.
- Ensure that the standoff is positioned correctly and aligned with the desired angle or distance.
- Use a wrench or socket set to tighten the standoff securely.
5. Final Checks:
- Verify that all threaded studs and standoffs are properly installed and tightened.
- Check for any movement or looseness in the connections.
- Ensure that the materials being connected are securely fastened to the structural steel or aluminum member.
For more detailed instructions and safety guidelines, please refer to the HILTI S-BT-MF M8/M10 Threaded Studs & Standoffs Instruction Manual provided by Hilti AG FL-9494 Schaan.
Add New Comment