User Manual Q&AAnswer
Feb 18, 2025 - 04:45 AM
To adjust the water temperature on the REDRING INSTANT I3VS Electric Manual Handwash, follow these steps:
1. Turn on the mains water supply and ensure the isolating service valve (if fitted) is fully open.
2. Turn the control xxxx anti-clockwise to the full cold position.
3. Check that the water flows freely from the handwash within a few seconds. The water from the patented 'Vortex' spray head will be at full force and at a cool temperature.
4. Rotate the control xxxx slowly clockwise. This will gradually reduce the water flow while the water temperature remains cool.
5. Rotate the control xxxx fully anti-clockwise to return to maximum water flow.
6. Switch on the mains electrical supply at the isolating switch. The 'Power' neon indicator will illuminate.
7. Turn the control xxxx clockwise and check that the water gets warmer. Turn anti-clockwise to check if the water gets cooler. Wait a few moments for the temperature of the water to stabilize.
Note: When the water temperature is changed, the flow rate alters.
8. Turn the control xxxx fully clockwise to stop the water flow.
Remember to demonstrate the operation to users and leave the user guide with them for future reference.
Add New Comment