User Manual Q&AAnswer
Feb 18, 2025 - 04:29 AM
To connect your computers to the BLACK BOX KVS4-4004DHVX Secure KVM Switch, please follow these steps:
1. Make sure that the power is turned off or disconnected from the KVM switch and the computers.
2. Use DisplayPort, HDMI, and DVI cables to connect the DisplayPort, HDMI, and DVI output ports from each computer to the corresponding DP IN, HDMI IN, and DVI IN ports of the KVM switch.
3. Use a USB cable (Type-A to Type-B) to connect a USB port on each computer to the respective USB ports of the KVM switch.
4. Optionally, connect a stereo audio cable (3.5mm to 3.5mm) to connect the audio output of the computers to the AUDIO IN ports of the KVM switch.
5. Connect a monitor to the DP OUT, HDMI OUT, and DVI OUT console ports of the KVM switch using DP, HDMI, and DVI cables.
6. Connect a USB keyboard and mouse to the two USB console ports of the KVM switch.
7. Optionally, connect stereo speakers to the AUDIO OUT port of the KVM switch.
8. Finally, power on the BLACK BOX KVS4-4004DHVX Secure KVM Switch by connecting a 12VDC power supply to the power connector, and then turn on all the computers.
Note: The computer connected to port 1 will always be selected by default after power up. You can connect up to 4 computers to the 4-port Secure KVM Switch.
Please refer to the user manual for additional information and troubleshooting tips.
Add New Comment