User Manual Q&AAnswer
Feb 18, 2025 - 04:20 AM
To connect an external signal source, such as a DVD player or CD player, to the FENTON 178.438 SPD Active Speaker Series, follow these steps:
1. Locate the LINE INPUT on the rear panel of the speaker (labeled as "Line input").
2. Connect the output of your external signal source (DVD player, CD player, etc.) to the LINE INPUT using an appropriate audio cable (e.g., RCA cable).
3. Slide the SOURCE select switch on the front panel of the speaker to the "DVD" position.
4. Adjust the master VOLUME control on the front panel to the desired level.
5. Adjust the master Equalizer (Bass and Treble controls) on the front panel to achieve the desired sound.
Note: If you want to play music from a USB device or SD card, slide the SOURCE select switch to the "USB" position and press the PLAY button on the front panel. Make sure the USB or SD card is inserted into the corresponding slot on the speaker.
Please refer to the instruction manual for more detailed information and illustrations on connecting external signal sources and operating the speaker.
Add New Comment