User Manual Q&AAnswer
Feb 18, 2025 - 04:18 AM
To connect the KUFATEC Complete set active Sound incl. Soundbooster to your Audi TT 8J, please follow the installation guide provided by KUFATEC. Here are the general steps:
1. Strip the insulation of the vehicle's cable and the cable from the KUFATEC set that you want to connect.
2. Twirl the wires of the stripped cable together.
3. Place the end of the cable you want to connect under the stripped point of the vehicle's cable and wrap it around.
4. Secure the connection by wrapping insulating tape around it.
Please note that these steps are a general guide, and it is important to refer to the specific instructions and diagrams provided in the installation guide for your Audi TT 8J model.
For more detailed instructions on the installation process, including removing trim panels, connecting CAN High & CAN Low, connecting ignition lead/ground, removing cover parts in the trunk, routing the connecting cable for the sound generator, installing the sound generator, and installing the pushbutton, please refer to the complete installation guide provided by KUFATEC.
It is important to ensure that the installation is done by trained qualified personnel and that all safety and legal instructions are followed. If you have any difficulties during the installation, KUFATEC offers support by phone or email.
Add New Comment