User Manual Q&AAnswer
Feb 18, 2025 - 04:15 AM
To connect your Jabra Engage 55 USB C MS Stereo Wireless DECT Headset to your computer, please follow these steps:
1. Ensure that your computer has a USB-C port available.
2. Take the USB-C cable provided with the headset and connect one end to the USB-C port on the headset.
3. Plug the other end of the USB-C cable into the USB-C port on your computer.
4. Wait for a few seconds to allow your computer to recognize the new device.
5. Open the Sound settings on your computer. You can do this by right-clicking the Sound icon in the taskbar and selecting "Open Sound settings."
6. In the Sound settings, navigate to the Output section and select your Jabra Engage 55 USB C MS Stereo Wireless DECT Headset from the drop-down list.
7. Similarly, in the Input section, select your Jabra Engage 55 USB C MS Stereo Wireless DECT Headset from the drop-down list.
8. If you are using a Jabra wireless device, such as the Jabra Link 380 Bluetooth adapter, make sure to select it as the default audio device as well.
9. Once you have selected the Jabra Engage 55 USB C MS Stereo Wireless DECT Headset as the default audio device for both output and input, click on "Apply" or "OK" to save the changes.
By following these steps, you should be able to successfully connect your Jabra Engage 55 USB C MS Stereo Wireless DECT Headset to your computer and set it as the default audio device. If you encounter any issues or need further assistance, please refer to the user manual provided with the headset or contact Jabra support for additional help.
Add New Comment