User Manual Q&AAnswer
Feb 18, 2025 - 04:10 AM
To install the InvisaCharge SL019 Wireless Charger, please follow these steps:
1. Align the center of the desktop sticker with the center of the U-shaped cardboard by using the two magnets provided.
2. Tear off the paper on the surface of the U-shaped cardboard and align and stick the U-shaped tray to the underside of the countertop.
3. Remove the U-shaped cardboard and insert the wireless charger into the U-shaped tray. You have the option to use the included screws to secure it in place.
4. Switch on the power and place your mobile phone on top of the desktop sticker to start wireless charging. You can use the optional cable clips to manage the charging cable.
Please refer to the manual for visual illustrations and further instructions on the installation process.
Note: It is important to follow the installation instructions provided to ensure the proper operation of the charger. Avoid installing the charger on or near metal surfaces, metal rails, or screws in the vicinity. Also, do not place any metal objects, such as ID cards or bank cards, in the charging area.
For any further assistance or questions, please consult the InvisaCharge manufacturer at warranty@invisacook.com.
Add New Comment