User Manual Q&AAnswer
Feb 18, 2025 - 03:27 AM
, follow these steps:
1. Turn off the house water supply and the circuit breaker or dedicated power before connecting the dishwasher.
2. Run the water supply line along the floor, approximately 6 1/2 – 7 3/4” (165–197 mm) from the left side of the opening, and tape it in place in front of the opening.
3. With the home water supply turned off, connect the water supply line to the inlet valve on the left front of the dishwasher. Tighten the compression nut securely.
4. Slide the water supply line back through the channel, pulling gently from inside the cabinet to make sure the line is not kinked, pinched, stressed, or crushed.
5. Ensure that the water supply line is passing freely through the channel and does not get caught under the dishwasher.
6. Remove the tape from the water supply line.
It is important to note that when connecting the dishwasher water supply line to the house water supply, sealing tape or compound should be used on pipe threads to avoid leaks. However, tape or compound should not be used on compression fittings.
For more detailed instructions and illustrations, please refer to the LG LDTS5552D 24 Inch Top Control Smart Dishwasher Installation Guide.
Add New Comment