User Manual Q&AAnswer
Feb 18, 2025 - 03:21 AM
To connect the speedlink SL-600400-BK-01 Acute Pure Presenter to your computer, please follow these steps:
1. Make sure your computer is turned on and running.
2. Locate the USB receiver that came with the presenter. It is a small device that plugs into a USB port on your computer.
3. Insert the USB receiver into an available USB port on your computer. Make sure it is securely connected.
4. Turn on the presenter by sliding the power switch located on the side of the device.
5. The presenter and the USB receiver will automatically pair with each other. You may see a notification on your computer indicating that the device is ready to use.
6. Once the pairing is complete, you can start using the presenter for your presentations.
Please note that if the presenter does not pair automatically, you may need to press the connect button on the USB receiver or the presenter itself to initiate the pairing process. Refer to the user guide for specific instructions on the pairing process.
It is important to keep in mind that the speedlink SL-600400-BK-01 Acute Pure Presenter is designed for indoor home/office use and is intended to be used as an input device for connecting to a computer. Do not disassemble the presenter and stop using it immediately if it is damaged. For further information or troubleshooting, you can refer to the user guide or visit the technical support section on the speedlink website.
Add New Comment