User Manual Q&AAnswer
Feb 18, 2025 - 03:20 AM
To install the nordlux LBGMCBO1 Glossy Table Lamp, please follow these steps:
1. Ensure that the lamp is only installed in areas where direct contact with water cannot occur, as it has an IP20 rating.
2. Since the lamp is Class II, it is double-insulated and does not need to be connected to the yellow/green earth wire.
3. The lamp has a Z-connection, which means that the wire cannot be replaced if damaged. In such cases, the lamp must be discarded.
4. It is important not to exceed the maximum wattage specified for the lamp.
Please refer to the mounting instructions provided with the lamp for detailed installation steps. Make sure to retain the mounting instructions for future reference.
For any further assistance or clarification, you can visit the official website of nordlux at www.dftp.dk.
Add New Comment