User Manual Q&AAnswer
Feb 18, 2025 - 03:18 AM
To install the TRADITIONAL BEAMS Steel Bracket for solid walls, follow these steps:
1. Mark out where you want the brackets to sit on the wall, ensuring the markings are level using a spirit level.
2. Drill the wall using an 8mm drill bit to create holes deep enough to accept the wall plugs or GripIt fixings.
3. Insert the wall plugs into the four holes and tap them flush with the wall using a hammer.
4. Insert a GripIt fixing into each hole and tap them flush with the wall. Use a flat head screwdriver to turn the cam and open the wings for a strong grip.
5. Align the steel brackets with the wall plugs or GripIt fixings and use a screwdriver or drill to secure them in position.
6. Place the pine shelf on top of the brackets and xxxx it down for additional support using the upward-facing holes.
Add New Comment