User Manual Q&AAnswer
Feb 18, 2025 - 03:01 AM
To assemble the COSTWAY GYM01315 Jewelry Cabinet Armoire Box Mirrored Storage Chest Stand Organizer, please follow the steps outlined in the user manual provided. Here is a general overview of the assembly process:
1. Before starting, carefully read each step in the manual to ensure you understand the instructions and follow them in the correct order.
2. Check that all the parts required for assembly are included. Most of the board parts should be labeled or stamped on the raw edges for easy identification.
3. Find a spacious area, preferably on a carpet, close to where you intend to place the jewelry cabinet.
4. Keep the necessary hand tools close at hand. Do not use power tools, as they may scratch or damage the parts.
5. Follow the step-by-step instructions provided in the manual to assemble the cabinet. Take your time and ensure each step is completed correctly before moving on to the next.
6. Once the assembly is complete, use a soft, clean cloth to dust the surface of the cabinet. Avoid using furniture polish unless you have tested it in an inconspicuous area first. Solvents should not be used, as they may damage the finish.
7. To clean the cabinet, use a soft, clean cloth to gently blot any liquid spills. Avoid rubbing the surface. Never use water to clean the furniture, as it may cause damage to the finish.
8. Periodically check the bolts and screws and tighten them if necessary.
9. It is recommended to keep the jewelry cabinet in a climate-controlled environment to prevent fading, warping, shrinking, and splitting of the wood. Avoid placing it in direct sunlight, as this may damage the finish.
By following these assembly and care instructions, you can ensure the longevity and proper maintenance of your COSTWAY GYM01315 Jewelry Cabinet Armoire Box Mirrored Storage Chest Stand Organizer. For any further assistance or specific inquiries, please contact the friendly customer service department at cs@gymaxservice.com.
Add New Comment