User Manual Q&AAnswer
Feb 18, 2025 - 02:41 AM
To perform safe isolation procedures using the Mills Martindale LOKKIT2PLUS Domestic Installer Lock Out Kit, follow these steps:
1. Identify the electrical circuit or equipment that needs to be isolated.
2. Ensure that all personnel are aware of the isolation process and that appropriate safety measures are in place.
3. Use the appropriate MCB lock from the kit to secure the circuit breaker associated with the circuit or equipment. The kit includes a yellow MCB lock (10mm clip), a red MCB lock (6mm clip), and a green mini MCB lock. Choose the lock that fits the specific MCB size.
4. Insert the MCB lock into the MCB toggle switch or breaker handle and secure it in place. This will prevent the circuit from being accidentally switched on.
5. Use the yellow isolation lock included in the kit to secure the isolation point. This lock ensures that the circuit or equipment cannot be energized while maintenance or testing is being carried out.
6. Attach the "Equipment Locked Out" tag to the locked isolation point. This tag serves as a visual indicator that the circuit or equipment is locked out and should not be operated.
7. Write relevant information on the tag using a black marker pen, such as the date, time, and the name of the person performing the isolation.
8. Once the necessary work is completed, remove the locks and tags in reverse order, ensuring that the circuit or equipment is safe to be energized again.
Note: It is essential to follow the guidelines provided by Electrical Safety First and the Health & Safety Executive Electricity at Work Regulations when performing safe isolation procedures. Always prioritize electrical safety to prevent accidents and injuries. For further information or clarification, refer to the Mills Martindale LOKKIT2PLUS Domestic Installer Lock Out Kit Owner's Manual or contact Mills Limited directly.
Add New Comment