User Manual Q&AAnswer
Feb 18, 2025 - 02:31 AM
To pair the Mandis Shop Screenplay-HD Remote Control with your device, please follow the steps below:
1. Ensure that your device is compatible with the Mandis Shop Screenplay-HD Remote Control. Refer to the device compatibility list in the user manual.
2. Make sure that the remote control has fresh batteries installed.
3. Turn on your device and put it in pairing mode. The method to activate pairing mode may vary depending on your device. Please refer to your device's user manual for instructions.
4. On the Mandis Shop Screenplay-HD Remote Control, press and hold the "Pair" button for 5 seconds. The "Pair" button is usually located on the back or side of the remote control.
5. The remote control's LED indicator will start flashing rapidly, indicating that it is in pairing mode.
6. Within 30 seconds, your device should detect the remote control and display a prompt to confirm the pairing. Follow the on-screen instructions to complete the pairing process.
7. Once the pairing is successful, the LED indicator on the remote control will stop flashing and remain solid.
Note: If the pairing process fails, try resetting the remote control by removing the batteries for a few seconds and then reinserting them. Repeat the pairing process from step 3.
For more detailed instructions and troubleshooting tips, please refer to the Mandis Shop Screenplay-HD Remote Control User Guide.
Add New Comment