User Manual Q&AAnswer
Feb 18, 2025 - 02:27 AM
To install the nVent Cleantray 90 Degree Elbow Outside Cover Sloped, please follow the steps below:
1. Ensure that you have all the necessary tools and equipment for installation, including a screwdriver and appropriate mounting hardware.
2. Identify the location where you want to install the elbow cover. Make sure it is suitable for the application and meets the required protection rating.
3. Position the elbow cover at the desired angle, ensuring that it aligns with the cable tray system.
4. Using the provided mounting holes, secure the elbow cover to the cable tray system using the appropriate mounting hardware. Make sure the cover is securely fastened to prevent any movement or dislodging.
5. Repeat the above steps for any additional elbow covers that need to be installed.
6. Once all the elbow covers are installed, double-check the alignment and ensure that they are securely fastened.
Please note that this is a general guide for installing the nVent Cleantray 90 Degree Elbow Outside Cover Sloped. For specific instructions and any additional information, please refer to the owner's manual provided with the product.
Add New Comment