User Manual Q&AAnswer
Feb 18, 2025 - 02:14 AM
To configure the analog inputs on the SENECA ZE-4DI-2AI-2DO device, you can use the Easy Setup software or the web server interface. Here are the steps to configure the analog inputs:
1. Connect the device to your computer using the appropriate communication port (RS485 or USB).
2. Open the Easy Setup software or access the web server interface by entering the device's IP address in a web browser.
3. In the software or web server interface, navigate to the analog input configuration section.
4. Set the desired acquisition speed for each channel. The acquisition speed determines the sampling time for each channel.
5. Configure the scaling for each analog input. This involves setting the start and stop scales for the electrical values and the corresponding engineering values.
6. Save the configuration changes and apply them to the device.
By following these steps, you can configure the analog inputs on the SENECA ZE-4DI-2AI-2DO device according to your specific requirements. For more detailed instructions, please refer to the user manual provided by SENECA.
Add New Comment