User Manual Q&AAnswer
Feb 18, 2025 - 01:35 AM
To install the MeTra SPY-JB320W Large Junction Box, follow these steps:
1. Determine the desired location for the junction box installation.
2. Use the provided drill template to mark the holes for installation.
- Hole A is for cables routed through the ceiling.
- Hole B is for cables routed through the side opening.
- xxxx hole 1 is for mounting the base.
3. Drill the necessary holes according to the marked locations.
4. Securely mount the junction box using the provided screws and xxxx hole 1.
5. Connect the cables from your mini dome or bullet Spyclops camera to the junction box.
6. Route the cables through either hole A or hole B, depending on your installation requirements.
7. Make sure all connections are secure and properly insulated.
8. Complete the camera installation according to the instructions provided with your Spyclops camera.
For further assistance or detailed instructions, please refer to the MeTra SPY-JB320W Large Junction Box User Manual available on the Metra Electronics Corporation website at www.MetraAV.com. You can also contact their customer support at 386-255-0234 for any additional inquiries.
Add New Comment