User Manual Q&AAnswer
Feb 18, 2025 - 01:33 AM
To properly install the PRAXIS M30 E-Cranks Carbon Crank Arms, follow these steps:
1. Identify the left and right crank arms by looking at the back of each arm.
2. Use an 8mm Allen torque wrench to tighten the crank arm bolt to a torque of 48-55Nm.
3. Spin the crank to ensure that it moves freely.
4. Your installation is now complete.
Note: Only an 8mm Allen wrench is needed to remove the crank arm. Insert the Allen wrench and turn it counterclockwise to initially loosen the bolt. After it loosens, the resistance will increase, which is normal. Continue turning to complete the removal of the crank arm.
Please refer to the provided user manual for more detailed instructions and safety information. It is recommended to have the product installed by a qualified bicycle technician to ensure proper installation and avoid any potential issues or injuries.
Add New Comment