User Manual Q&AAnswer
Feb 18, 2025 - 01:27 AM
To connect the master Easy kvm-tec First Air KVM extender over IP, please follow these steps:
1. Connect the CON/Remote Unit and the CPU/Local Unit to the included 12V 1A power supply.
2. Connect the USB cable to a USB port on your PC and connect the other end of the USB cable to the CPU/Local Unit. Connect your keyboard and mouse to the CON/Remote Unit.
3. Use a network cable to connect the CPU/Local Unit and the CON/Remote Unit.
4. Connect the DVI cable from the DVI socket of your PC to the DVI socket of the CPU/Local Unit (PC-in).
5. Connect another DVI cable from the DVI socket of your PC to the DVI socket of the CPU/Local Unit (PC-in 2). Then connect your monitor to the CON/Remote Unit using a DVI cable.
6. Connect the PC audio/out to the local audio/in using an audio cable. Connect the audio/out to the microphone using another audio cable.
7. Finally, if you are using a switch, connect all endpoints to the switch. Make sure that all connections have a bandwidth of 1Gbit/sec. For video sharing, the network needs to support IGMP snooping.
Please refer to the master Easy kvm-tec First Air Installation Guide for more detailed instructions and diagrams. You can download the manual from the kvm-tec website or contact their support team for assistance.
Add New Comment