User Manual Q&AAnswer
Feb 18, 2025 - 01:23 AM
According to the instruction manual, the replaceability of the light source or operating device in the Paulmann 955.06 URail LED Rail Spot Tubo Single Spot depends on the specific situation. Here are the possible scenarios and instructions:
1. Light source or operating device can be replaced by end users without permanent damage to the luminaire:
- To replace the light source, follow these steps:
1. Make sure the luminaire is switched off and disconnected from the power supply.
2. Gently twist the light source counterclockwise to remove it from the luminaire.
3. Insert the new light source by twisting it clockwise until it is securely in place.
4. Reconnect the luminaire to the power supply and switch it on.
- To replace the operating device, follow these steps:
1. Make sure the luminaire is switched off and disconnected from the power supply.
2. Locate the operating device, which is usually a separate component within the luminaire.
3. Disconnect any connectors or wires attached to the operating device.
4. Remove the old operating device from its housing.
5. Insert the new operating device into the housing, ensuring it is properly aligned.
6. Reconnect any connectors or wires to the new operating device.
7. Reconnect the luminaire to the power supply and switch it on.
2. Light source or operating device can be replaced by a qualified electrician without permanently damaging the luminaire:
- In this case, it is recommended to seek assistance from a qualified electrician to ensure proper replacement. They will have the necessary expertise and tools to safely replace the light source or operating device without causing any damage to the luminaire.
3. Light source or operating device is not replaceable, and the luminaire must be replaced:
- If the light source or operating device is not replaceable, it means that the entire luminaire needs to be replaced. In this situation, it is recommended to contact the manufacturer or a professional lighting retailer to find a suitable replacement for the Paulmann 955.06 URail LED Rail Spot Tubo Single Spot.
Please note that these instructions are based on the information provided in the manual. If you encounter any difficulties or have further questions, it is always best to consult the manual or contact the manufacturer for specific guidance.
Add New Comment