User Manual Q&AAnswer
Feb 18, 2025 - 01:21 AM
To start the BE POWER EQUIPMENT HW2765HG Honda Pressure Washer, please follow these steps:
1. Ensure that the pressure washer is on a level surface and the fuel tank is filled with 86 octane fuel (up to 10% ethanol).
2. Check the oil level in the engine. The recommended oil type is SAE 10W30. Add oil if necessary.
3. Turn the fuel valve to the ON position.
4. Move the choke lever to the CLOSED position.
5. Pull the recoil starter handle slowly until you feel resistance, then pull it briskly to start the engine.
6. Once the engine starts, gradually move the choke lever to the OPEN position.
7. Allow the engine to warm up for a few minutes before using the pressure washer.
For more detailed instructions and safety precautions, please refer to the user manual provided with the BE POWER EQUIPMENT HW2765HG Honda Pressure Washer.
Add New Comment