User Manual Q&AAnswer
Feb 18, 2025 - 01:01 AM
To properly attach the ZOLL Stat-Padz ECG Electrodes to a CPR training manikin, follow these steps:
1. Connect the electrodes (8900-5005) to the ZOLL Training Cable (8000-1610).
2. Fasten the Training Cable to the Defibrillation Cable.
3. Press the StatRad Training Electrodes firmly to the surface of the CPR training manikin, ensuring good contact.
4. Make sure there are no air pockets between the electrodes and the manikin's surface. If there are any air pockets, gently move them to the outer edges of the electrodes.
5. Connect the Defibrillation Cable to the Defibrillator and the ZOLL Simulator.
Please note that the ZOLL Stat-Padz ECG Electrodes are specifically designed for training purposes only and should not be used for clinical use.
Add New Comment