How do I pair the datek Home Door/ Window Sensor with my smart home system? (datek Home Door Window Sensor Owner's Manual)

Answer

manuals.plus

Feb 18, 2025 - 12:44 AM


To pair the datek Home Door/ Window Sensor with your smart home system, follow these steps:

1. Make sure your smart home system is in pairing mode. Refer to your smart home system's user manual for instructions on how to enable pairing mode.

2. Locate the pairing button on the datek Home Door/ Window Sensor. It is a small button usually located on the device itself.

3. Press and hold the pairing button on the datek Home Door/ Window Sensor for a few seconds until the LED indicator starts flashing rapidly.

4. On your smart home system, initiate the pairing process. This process may vary depending on the specific smart home system you are using. Refer to your smart home system's user manual for instructions on how to add a new device.

5. During the pairing process, your smart home system will search for nearby devices. Once it detects the datek Home Door/ Window Sensor, it will prompt you to confirm the pairing.

6. Confirm the pairing on your smart home system, and it will establish a connection with the datek Home Door/ Window Sensor.

7. Once the pairing is successful, the LED indicator on the datek Home Door/ Window Sensor will stop flashing and remain solid.

Note: It is important to ensure that your smart home system supports Zigbee 3.0, HA 2.1, or ZLL protocols, as these are the radio protocols used by the datek Home Door/ Window Sensor.