User Manual Q&AAnswer
Feb 18, 2025 - 12:23 AM
To insert a Micro-SIM card and connect the battery for the TELTONIKA FMB640 Professional GNSS Terminal, please follow these steps:
1. Unscrew the 4 screws counterclockwise located on the bottom of the device.
2. Remove the cover.
3. Insert the Micro-SIM card into the SIM slot 1 or SIM slot 2. Make sure the SIM card cut-off corner is pointing forward to the slot. SIM slot 1 is closer to the PCB, while SIM slot 2 is the upper one. Ensure that the PIN request for the SIM card is disabled or refer to the Security info section in the Teltonika Configurator manual for instructions on how to enter it later.
4. Connect the battery to the device as shown.
5. After configuration, refer to the "PC Connection (Windows)" section for further instructions.
6. Attach the device cover back.
7. xxxx in all the screws. The device is now ready to be mounted.
Please note that these instructions are a summary and it is recommended to refer to the TELTONIKA FMB640 Professional GNSS Terminal User Manual for detailed and accurate instructions.
Add New Comment