User Manual Q&AAnswer
Feb 18, 2025 - 12:18 AM
To use the bluebuilt 886370 USB-C PD 30W Power Delivery Charger, follow these steps:
1. Check the power output: Before connecting your device, ensure that the power output of the charger is sufficient for your device. The charger can supply up to 30W of power.
2. Connect the charger: Plug the charger into a compatible power outlet. Make sure the socket is easily accessible and connected to the public power supply. If you are using a multi-socket power strip, ensure that the total power consumption of all connected devices does not exceed the power strip's maximum throughput rating.
3. Connect your device: Use a USB-C cable to connect your device to the charger. Ensure that the power requirements of your device do not exceed 30W. Refer to your device's operating manual for specific instructions.
4. Charging: Once your device is connected, the charger will start charging it. The charger supports fast charging, which allows for quicker charging times.
5. Disconnecting: To disconnect the charger, either use the On/Off switch (if available) or unplug the power cord from the socket. It is recommended to disconnect the device from the power supply before cleaning it or if it is not going to be used for a long period of time.
Please note the following safety instructions:
- Do not open or continue to use the charger if it becomes damaged.
- Do not use the charger if the AC adapter, adapter cable, or mains cable are damaged.
- Do not attempt to service or repair the product yourself. Leave any service work to qualified experts.
- Only operate the charger from an approved socket connected to the public power supply.
- The charger is suitable for a mains voltage of 100-240V and can be used worldwide. However, a country-specific adapter may be necessary.
- Keep the charger away from dirt, moisture, and overheating. Use it in a dry environment and avoid exposure to major shocks.
- Do not modify the charger in any way, as it will void the warranty.
- Use the charger for its intended purpose only and keep it out of the reach of children.
- Do not use the charger in the immediate vicinity of heaters or other heat sources or in direct sunlight.
- The charger is intended for indoor use only and should be used in moderate climatic conditions.
- Do not use the charger in areas where the use of electronic devices is not permitted, in moist environments, or near splashes.
For any further information or warranty-related queries, refer to the provided user manual or contact the manufacturer, BlueBuilt.
Add New Comment