User Manual Q&AAnswer
Feb 18, 2025 - 12:17 AM
To change the battery in the KNOP TX901A Wristband Transmitter, follow these steps:
1. Remove the screws on the back of the transmitter using a screwdriver.
2. Disassemble the TX901A by carefully separating the parts.
3. Locate the lithium battery, type CR2450, inside the transmitter.
4. Carefully slide the old battery out of the holder.
5. Insert a new CR2450 battery into the holder, ensuring it is properly aligned.
6. Reassemble the transmitter by putting the parts back together.
7. Use the screws to secure the back of the transmitter.
Please refer to Figure A in the user manual for visual guidance on disassembling and replacing the battery.
Add New Comment