User Manual Q&AAnswer
Feb 18, 2025 - 12:16 AM
To mount the STIHL RG-KM Rotary Cutting Head on the powerhead, follow these steps:
1. Shut off the powerhead.
2. Loosen the xxxx on the attachment.
3. Push the drive tube into the gear housing and rotate it until the gear shaft engages.
4. Tighten the xxxx moderately.
5. Position the gear housing so that it faces up.
6. Tighten down the xxxx firmly.
For more detailed instructions and illustrations, please refer to section "Mounting and Removing the Attachment" in the STIHL RG-KM Rotary Cutting Head Instruction Manual.
Add New Comment