User Manual Q&AAnswer
Feb 17, 2025 - 11:35 PM
To install the TCP EMBACKUPCOMDL1 Commercial Downlight Emergency Back-Up, please follow the instructions provided in the manual. Here is a step-by-step guide:
1. Ensure that the power is turned off before starting the installation process.
2. Make sure that the electrical enclosure is properly grounded according to the National Electrical Code (NEC) and/or Canadian Electrical Code (CSA).
3. The product can be surface-mounted or suspended-mounted.
4. It is suitable for use in damp or dry locations only.
5. The downlight emergency back-up can be used in sealed fixtures or installed in the open area of the fixtures.
6. Avoid exposing the product to fire or excessive temperature, as it may cause an explosion.
7. Do not attempt to disassemble the product, as it does not have any serviceable parts.
8. For the first-time usage, charge the battery consistently for more than 24 hours to activate the whole battery cell discharging/charging cycles.
9. It is crucial to have the product installed by a qualified electrician who is familiar with the construction and operation of the product and the associated hazards.
10. Please note that these instructions may not cover all details or variations specific to your equipment or installation requirements. If you need further information that is not covered in the manual, you can contact the TCP Customer Service Department at 800-324-1496 for assistance.
Remember to read and follow all safety instructions provided in the manual.
Add New Comment