Answer

Feb 17, 2025 - 11:24 PM
To set the speed steps on the mXion DRIVE-XS Main Board, you need to adjust CV 29 Bit 1. If you want to use 14 speed steps, set CV 29 Bit 1 to 0. If you want to use 28 or 128 speed steps, set CV 29 Bit 1 to 1. The difference between 28 and 128 speed steps is automatically detected by the decoder. Please refer to the CV-Tabelle in the user manual for more information on programming and adjusting the speed steps.
Add New Comment