User Manual Q&AAnswer
Feb 17, 2025 - 11:03 PM
To clean the filter on your Dyson Airwrap Hair Styler, follow these steps:
1. Ensure that you unplug your machine from the main electricity supply and allow it to cool down before cleaning the filter.
2. The filter must be cleaned when the white LED starts flashing.
3. Slide the filter cleaning brush over the cable and onto the filter cage.
4. Using a rotating action, clean the filter cage thoroughly.
5. Remove the filter cleaning brush.
6. Hold the handle of your machine and pull the filter cage downwards, onto the cable.
7. Gently pull open the filter cage and slide it off the cable.
8. Wash the filter cage under a warm, running tap.
9. Shake the filter cage to remove excess water and leave it to dry naturally.
10. Do not use your machine without the filter cage attached.
11. Using a rotating and up and down action, clean the filter mesh with the filter cleaning brush until all debris has been removed.
12. Do not use water or chemicals to clean the filter mesh.
13. Gently pull the filter cage open and slide it onto the cable.
14. Slide the filter cage towards the handle and twist until it snaps into place.
For more information, you can refer to the user manual or visit the Dyson website at www.dyson.com/myairwrap.
Add New Comment