User Manual Q&AAnswer
Feb 17, 2025 - 10:58 PM
To connect the mXion APS Shuttle Train Control to your power supply, please follow the instructions provided in the manual. Here is a step-by-step guide:
1. Make sure to read and understand the manual thoroughly before proceeding with the installation.
2. Ensure that the device is not a toy and is suitable for users aged 15 and above.
3. Before connecting any other devices, set the outputs to the appropriate values to avoid any potential damage.
4. Find a protected location to place the decoder, ensuring that it is not exposed to moisture.
5. Check if your device is programmed with the latest firmware, as some functions may only be available with the latest firmware version.
6. The mXion APS Shuttle Train Control supports DC/AC/DCC operation.
7. The device has 2 engine outputs, each with a maximum current of 0.8A.
8. There are also 2 contact inputs and 2 function outputs available.
9. The device features potentiometers for adjusting the stop time and drive time.
10. Use the provided xxxx drives for stable mounting of the device.
11. The drive time can be set between 2 and 132 seconds, while the wait time can be set between 0 and 64 seconds.
12. Ensure that you have received the complete scope of supply, including the manual and the mXion APS device.
13. Install the device according to the connecting diagrams provided in the manual.
14. It is important to note that the device is protected against shorts and excessive loads. However, if there is a connection error, such as a short circuit, the safety feature may not work, and the device could be destroyed.
15. Pay attention to potential short circuits caused by the mounting screws or metal connectors.
16. The drive time can be controlled either through the potentiometer or the contact inputs, and the drive speed will be set by the connected power supply.
17. If you want to use the contact inputs as a limiter, it is possible to do so.
Please refer to the manual for more detailed instructions and diagrams on how to connect the mXion APS Shuttle Train Control to your power supply.
Add New Comment