How do I clean and maintain the HOMEDEPOT Freestanding Double Slipper Soaking Bathtub? (homedepot Stone Resin Flatbottom Solid Surface Freestanding Double Slipper Soaking Bathtub Instruction Manual)

Answer

manuals.plus

Feb 17, 2025 - 10:46 PM

To clean and maintain the HOMEDEPOT JH-W54326736 Clovis bathtub, follow these guidelines:

1. Daily Cleaning: Rinse the bathtub with mild soap and warm water, then wipe it dry with a cloth.

2. Prevent Standing Water: Avoid leaving any standing water in the tub, as it can lead to mineral deposits that may affect the appearance. Always ensure the tub is dry after use.

3. Rinse After Cleaning: After using any cleaning agent, rinse the bathtub thoroughly and wipe it dry with a cloth. This helps remove any residue. If mineral deposits build up over time, use a mild solution of vinegar and water to clean, followed by thorough flushing with water.

4. Avoid Scratching: Do not use steel wool or scouring pads, as they can damage the surface and cause discoloration.

5. Avoid Prolonged Exposure to Cleaning Agents: Do not let household cleaning agents or bleach sit in the bathtub for a long period, as this may ruin the finish.

6. Prevent Damage: Do not leave rubber mats, sponges, or cleaning pads in the bathtub for extended periods, as they may damage the finish.

7. Do Not Use as a Cutting Surface: Avoid using the inside of the tub as a cutting surface to prevent scratches.

Note: The manual also mentions two additional points:

- Uneven Surface: To remove any extra wax and achieve a smooth surface, lightly wipe the bathtub with a clean cloth and warm water in circular motions before use.

- Water Stains: Water stains may be present on the surface due to testing the bathtub overflow drains. These can be cleaned using the recommended cleaning methods mentioned above.

By following these care and maintenance instructions, you can keep your HOMEDEPOT JH-W54326736 Clovis bathtub clean and in good condition.