User Manual Q&AAnswer
Feb 17, 2025 - 10:41 PM
To install and connect the mXion WHZ Universal Turnout Heater, please follow the instructions provided in the manual. Here is a step-by-step guide:
1. Read the manual thoroughly before starting the installation process.
2. Choose a protected location to place the decoder. It should not be exposed to moisture.
3. Make sure the outputs are set to the appropriate value before connecting any other devices to avoid any damage.
4. Ensure there are no short circuits caused by the mounting screws or metal.
5. Connect the device according to the connecting diagrams provided in the manual.
6. Be cautious of connection errors, such as shorts, as this can damage the device.
7. Note the CV basic settings in the delivery state.
8. If you encounter any issues or need further assistance, refer to the hotline contact information provided in the manual for technical support and application examples.
Please refer to the manual for more detailed instructions and diagrams specific to your installation requirements.
Add New Comment