User Manual Q&AAnswer
Feb 17, 2025 - 10:41 PM
To configure the network settings for the QS-SUMMARY19/22HL client monitor, please follow these steps:
1. Connect a USB mouse to the monitor.
2. Right-click on the mouse to exit the Q-SUMMARY application.
3. Go to the system settings by selecting "Network" and then "Ethernet".
4. Set the network parameters according to your network configuration.
5. Exit the settings and go back to the main menu to launch the Q-SUMMARY application.
If you have configured the QS-SUMMARY19/22HL client monitor correctly, you can manage its settings using the Q-Discovery application.
Please note that if you are using a static IP address, you will need to manually set the network parameters. If you are using DHCP, the monitor will automatically obtain the network settings from your network.
For further assistance or troubleshooting, you can contact Visel Italiana's telephone support at +39 0773 416058 or email them at sviluppo@visel.it.
Add New Comment