Answer

Feb 17, 2025 - 10:38 PM
To install the APC EPDU1116S PDU Switched Rack Power Distribution Unit, you have two options: vertical installation with brackets or toolless mounting pegs. Here are the steps for each option:
Option 1 - Vertical Installation with Brackets:
1. Attach the two brackets to the Rack PDU using the provided screws.
2. Install the PDU onto the rack using the provided four M5 x 10 mm self-tapping screws.
Option 2 - Toolless Mounting Pegs:
1. The mounting pegs are already installed at the factory. Slide both mounting pegs into the holes located in the channel on the rear panel of the rack.
2. Snap the Rack PDU into place by pushing it downward until it locks into position.
Note: When installing the Rack PDU, ensure that the power cord plug is accessible and connected to a grounded outlet.
For more detailed information on the installation process, please refer to the User Guide for this device, which can be found online at www.apc.com.
Please remember to follow all safety precautions mentioned in the installation guide to avoid electric shock, fire hazards, and other potential risks. If you have any further questions or concerns, it is recommended to contact APC by Schneider Electric customer support for assistance.
Add New Comment