User Manual Q&AAnswer
Feb 17, 2025 - 10:32 PM
To install the Zennio ZPDEZTPVT Motion Detector with Luminosity Sensor for Ceiling Mounting, follow these steps:
1. Connect the device to the KNX bus using the on-board KNX connector. The device is powered through the KNX bus, so no additional external power is required.
2. Mount the device on the ceiling or false ceiling using the provided accessories. Make sure it is securely attached.
3. Once the device is powered on, the detection notification LED will flash red for one minute during the start-up process.
4. To configure the device, import the corresponding database in ETS (Engineering Tool Software) and add the device to the desired project's topology.
5. In the ETS parameterization, you can activate or deactivate the desired functionality, such as presence detection, logic functions, and heartbeat notification.
For more detailed information on the installation process and security procedures, please refer to the Zennio ZPDEZTPVT Motion Detector with Luminosity Sensor for Ceiling Mounting User Manual, which can be found in the original packaging or on the Zennio website.
Note: The information provided here is a summary of the installation process. For complete and accurate instructions, please consult the user manual.
Add New Comment