User Manual Q&AAnswer
Feb 17, 2025 - 10:32 PM
Sure! Here are the step-by-step instructions on how to upgrade the firmware on your Thuraya MarineStar satellite terminal:
1. Connect MarineStar to PC/Laptop: Take a standard USB-to-Serial cable and connect its DB9 side to the MarineStar serial port and the USB side to your PC or laptop.
2. Open the Thuraya MNB-01 Upgrader: Double-click the upgrader installer application (Thuraya MNB-01 Upgrader) that should be installed on your PC or laptop. You may see a warning message, but you can proceed by pressing the OK button.
3. Select the Com Port: Click the "port setup" button in the application, which will open a window where you need to select the Com port of the USB-to-Serial cable connected. You can find the Com port in the device manager of your PC or laptop.
4. Select the firmware file: Click the "Open" button in the application, which will open a window where you have to select the MarineStar firmware file. Make sure you have the correct firmware file for your MarineStar model.
5. Start Uploading the Firmware file: Click the "Start" button in the application to begin the upgrade process. It is important not to interrupt the upgrade process and avoid disconnecting the cable while the upgrade is in progress.
6. After the upgrade: Once the upgrade process is complete, you will see a confirmation message. Press the exit button in the application to terminate it.
Please note that these instructions are based on the provided user manual for the Thuraya MarineStar firmware upgrade. Make sure to follow the instructions carefully and refer to the user manual for any specific details or troubleshooting steps.
Add New Comment